Category Archives: Garage Door Spring

Garage Door Springs – Efficient Operating Mechanism

The garage door springs are the most critical part of the garage door. In case, they are not properly installed, fixed, and maintained, they can lose their strength and eventually break down causing fatal accidents. It is very important to properly take care of these heavy-duty metal torsion springs. Well, it is not a simple matter. Check the garage door spring regularly. There are several points which you should understand to make sure that there is no malfunction which can cause major and costly problems later. Visit here https://www.acegaragedoorrepairraleigh.com/broken-garage-door-springs/ to learn more about garage door springs.

Garage door springs are installed to open and close a garage door smoothly and effortlessly. There are two types of springs. Both the torsion and extension springs are used for the garage door depending on the type and material used. Extension springs are normally installed on lighter garage doors such as, fiberglass sectional garage door and one-piece tilt-up garage door. These springs are hanged over the top of the garage door and connected near the back of the upper track of the garage door. If you want to install, adjust, or fix the springs, you can do it on your own easily. However, they are still tricky and dangerous if you are not following the instructions properly.

Torsion springs are ideal for heavy constructions. They may found on both sides of the garage door. You should hire professional services to deal with these types of springs. They have been known to cause damages, serious injuries, and even deaths. Garage doors having torsion springs can be difficult to manage. They are used to handle the 400-500 pounds weight of a garage door; therefore the springs must be powerful enough to operate the garage door.  If you have kids, instruct them properly to never stand near the garage door when it is going up or down. In addition to this, it is good to install the keypad out of the range of young kids. It will help to prevent accidents. No matter how much you educate your kids, young kids would want to play with the button due to curiosity.

Even well-maintained torsion springs will need to be replaced due to continuous usage. In order to avoid serious problems, it is wise to conduct regular check-ups on your springs. Remember, when one spring breaks the other is likely to get damaged soon after. It is advisable to replace both at the same time. Springs replacement projects can cost from $75 to $450. It is a costly project, therefore; search around to compare the price of services. Note here that it might be worth paying more to avail high-quality services and avoid damages. Torsion springs store a high amount of pressure when a garage door is in the closing position. So if the garage door fails to open due to a malfunctioning spring, it will not hurt anyone. In case the spring broke during the opening process, it would potentially injure someone around it.

AT The Bottom: Garage door springs are powerful and dangerous equipment that should be maintained to avoid injuries. You will have to inspect them periodically to make sure they will function in good condition. The durability of springs is determined through certain factors such as, frequency of usage, maintenance, compatibility with the garage door, and quality of garage door. If you are looking to replace the garage door springs, it is wise to have professional services to handle the project for you.

Need To Know More about Garage Door Springs

There are two types of garage door springs. The extension garage door springs are long and heavy devices. They can be placed at the upper part of the door or mounted on both sides of the door.  Other is tension garage door spring that is mounted above the center of the door and parallel to the surface of the frame of the door. The tension garage door spring working on the basic rule of tension and attached to both sides of the door to the lower panel with the help of cables. Click on the link http://www.greensboroncgaragedoorrepair.com/broken-garage-door-springs/ to get more information about the garage door springs.

It is also necessary to note here that attempting DIY garage door spring repair and replacement can be dangerous if not handled with care. You should have to adopt the right precautions because these springs are under extreme tension. You should be careful because you will lose your eyes, fingers, hands, or even your life. That is why; it is always advised to leave this dangerous task on the garage door professional.

The following are the necessary factors that should be kept in mind before attempting any DIY garage door spring work.

  • Before attempting anything, release the tension in the existing spring
  • Stay away from cable drums
  • Remember, never use a screwdriver to wind off and wind up the springs
  • Make sure that you have inserted a bar that is well fitted into the winding core before checking the setscrews. Never ever use a box wrench or socket box with the setscrews.
  • Don’t remove the bar from the cone while performing garage door spring replacement
  • When you wounding up the spring, don’t touch the brackets.

The following mentioned is an easy and convenient procedure for garage door spring replacement.

  • Disconnect the power supply of the door and power cord of opener. Remove the garage door opener from the door. You have to remove a flip or fuse from the circuit breaker to disconnect the opener.
  • Make sure that you have a shop for the right type and size of garage door spring to replace with the old one. Match the type and dimensions of the new tension springs with the old one. Don’t touch the winding bar and never grab the torsion spring.
  • Don’t forget to mark each end of the shaft to be used to balance the door after garage door installation.
  • Wind off the tension spring and remove the screws and bolts that are holding the cones to the brackets.
  • Remove, replace and reinstall all the necessary hardware
  • Carefully, windup the new spring
  • Check the garage door balance
  • Apply some lubrication for smooth friction
  • Connect the garage door opener to operate the door and check to see if it’s functioning.