Common Garage Door Repair Jobs

A garage door may seem a simple piece of the machine but you should know that it is created with a lot of pressure and complex parts. There are a lot of garage door parts that could fail with the passage of time. In order to avoid emergency situations, you should be familiar with the most common garage door problems that could happen. If you don’t know where to start, take the help of professional garage door services such as Charlotte garage door repair to take care of your garage door.

  • Garage door does not open or close properly:

If you have an automatic garage door, most probably it is installed with two safety sensors. It is essential that these sensors should be aligned correctly and obstructions free. If the sensors are not the source of the issue, the culprit might be the force limit switch. You can find it on the backside of the garage door opener. It may have two plastic screws for up and down. You just need to readjust the limit switch. Once you made the adjustment, you should test the garage door to see if this trick solves the issue.

  • Garage door reverses upon touching the ground:

In some cases, you need professional garage door repair aid because the garage door stops and opens again right after closing. To fix the issue, you will have to readjust the limit switch once again. If your garage door does not touch the floor and go back to its opened position, the culprit might be a close force adjustment unit. This issue happens as the garage door gets older and springs lose their tension. You will have to adjust or replace the springs to increase the tension.

  • Garage door motor wont stops running:

One evening when you arrive home you might notice that the garage door motor seems to work even after the garage door closes completely. It indicates that you will have to inspect the limit switch. You can adjust it through tracks or an opener. Try it quickly to see whether this trick resolves the problem. Don’t forget to check the photo eye of sensors as a pool of dust could fool the mechanism that there is obstruction under the garage door.

  • Garage door opener seems working but garage door does not move:

In some cases, the garage door opener is running but the garage door does not move, which means that the garage door is functional and you will have to inspect the hardware of the garage door to make sure that there is no obstruction at all. The motor has the power to lift or lower the heavy garage door but the spring might not be tense or strong enough. It means that you will have to readjust the tension of the springs.

In order to determine whether or not the garage door opener is malfunctioning, you should disconnect it and try to open or close the garage door manually. Open and close the garage door a few times to test the performance of the springs and opener. Lift the garage door to its halfway.  If it is stable at its position, then everything is perfect. If it does not then you will have to adjust the garage door springs. On the opposite side, if the garage door maintains its position then the garage door opener is to blame. You should consult a professional garage door expert to reprogram or replace the opener.